VVDI BIM tool Pro


Zeptejte se cena: VVDI BIM tool Pro



    VVDI BMW Tool  not only for locksmith, it has functions of coding and programming and much more.
    Vvdi bmw has possibility for manual coding and changing cars vo (vehicle order ) , emergency flash and retrofit options.
    VVDI BMW Tool covers the features of BMW VVDI2, It also supports E/F/G encoding and 8HP gearbox functions, as well as encoding function, including scanning clear DTC .etc.

    1. Support  E chassis/F chassis Programming function
    2. Support E chassis / F chassis code function
    3.OBD key Key: Support CAS1/CAS2/CAS3/CAS3+/ISTAP/ etc.
    4. File Generation Key: Supports CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+, etc.
    5. Support FEM/BDC system to generate keys, replace FEM/BDC control unit, support reset mileage
    6. Supports mileage correction CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+
    7. Support for reading EEPROM and sync data for CAS1/CAS2/CAS3/CAS3 systems
    8. Support simultaneous engine and CAS, synchronous ELV and CAS
    9. Support reading SN data from the engine

    ===== BMW V1.8.5 (2022-05-23) =====
    -Require firmware V1.8.4

    1. Support mileage calibration for ISTAP CAS3+ via OBDII
    2. Support read part eeprom for ISTAP(9389115/9389116/9395656/9395657) via OBDII
    3. Support change CAS ISN for ISTAP(9389115/9389116/9395656/9395657) via OBDII
    4. Support write customrize VO code

     

    ************************************************************************
    *** 2021-12-24
    *** Require firmware V1.8.4
    ************************************************************************
    ===== BMW V1.8.4 =====
    ******** This version must update the device firmware to V1.8.4 ********
    1. Improvement for E-Series programming and coding
    2. Improvement for F/G-Series programming and coding
    3. Bugfix

    V1.8.0 (2021-07-13 )
    ********   This version must update the device firmware to V1.8.0   ********
    1. Require update firmware V1.8.0: Support check licnese(Menu->Synchronize device time->Check license)
    2. After update to V1.8.0, you must perform synchronize device time first(Menu->Synchronize device time->Online synchronize)
    3. Improvement for F/G-Series programming and coding
    4. Rlease Usermanual v2.0, you'd better read it first
    5. Bugfix

    ===== BMW V1.7.5 =====  2021-06-08
    1. Bugfix for BOSH ECU adapter.
    2. Support unlock FEM/BDC directly for ISTA V4.28.41 verison
    3. Support reset EKPS producte mode
    4. Support OBD delete key for CAS1/CAS2/CAS3/CAS3+
    5. Suport OBD command open car door for CAS4/FEM/BDC(F/G series program and coding->Special function->Execute command)
    6. Bugfix

    ===== BMW V1.7.3 =====  2021-04-22
    Require firmware V1.6.4
    1. Support program not support unlock FEM/BDC directly, After programming can do unlock function
    2. Bugfix for E-Series programming
    3. Improvement for F/G-Series programming and coding
    4. Bugfix

    VVDI BMW latest software version V1.6.0 update
    ************************************************************************
    *** 2020-04-15  Require firmware V1.4.6
    ************************************************************************
    ===== BMW V1.6.0 =====
    1. Improvement for CAS4 OBD(5M48H/1N35H/1L15Y) FAST-MODE unlock:
       1). Unlock only need 2 minutes
       2). Support read D-FLASH(EEPROM), P-FLASH via OBDII
       3). Support OBD exchange CAS4 
       4). Suppot fix remote/smart function via OBDII
    2. Improvement for E-series programming and coding: Support programming compatible software version
    3. Improvement for F/G-series programming and coding
    4. Support read E-series 6HP ISN - require online
    5. Add FSC function Support backup license, write license, calculate NBT/CIC activate code
    6. Support OBD read ISN - EDC16xx, EDC17xx
    7. Bugfix for F-series special function: Initialize windows
    8. Improvement for exchange CAS3/CAS4/CAS4+
    9. Support customer request with car
    10. Bugfix

    VVDI BMW TOOL latest software version V1.5.0 update
    ************************************************************************
    *** 2020-01-13
    *** Require firmware V1.4.3
    ************************************************************************
    ===== BMW V1.5.0 =====
    1. Improvement for F-Series coding and programming
    2. Bugfix for Disable/Enable key for CAS4
    3. Support get ISN from EDC17 eeprom dump file
    4. Special function for F/G series: Update MSM, Reset FlexRay, Initialize car window
    5. Support search coding
    6. Bugfix

    ************************************************************************
    *** 2020-01-03
    *** Require firmware V1.4.3
    ************************************************************************

    ===== BMW V1.4.9 =====
    1. Improvement for F-Series coding and programming-Support update installECUList
    2. Improvement for VIN decode function
    3. Support reset F-Series 6HP EWS information
    4. Special function for F/G series: Improvement for switch ON ignition
    5. E-series ECU synchronize code(OBDII): Add new type for N73_R0, N73_L0, ME9N62, ME9E65 etc

    ***********************************************************************
    *** 2019-12-26
    *** Require firmware V1.4.3
    ************************************************************************
    ===== BMW V1.4.7 =====
    1. Improvement for E-Series coding and programming-Bugfix for E65
    2. Improvement for F-Series coding and programming-Support select target version manually
    3. F/G-Series support update I-step
    4. Bugfix for G-Series identification
    5. Improvement for FEM/BDC prepare dealer key
    6. Improvement for CAS4 prepare dealer key
    7. Add transponder function: Menu->Special Function->Transponder Read/Write support HITAG2, HITAG3
    8. Support chassis classify, VIN decode function
    9. Add special function for F/G series: Reset engine start, switch off transport mode, reset ELV, write SVT, initialize Flexray etc.

    VVDI BMW Tool Update info:
    2019-11-16 Require firmware V1.4.3
    BMW V1.4.6

    1. Improvement for E-Series coding and programming
    2. Improvement for F-Series coding and programming
    3. Bugfix

    2019-11-08     Require firmware V1.4.3
    V1.4.5 VVDI BMW Tool
    1. Improvement for E-Series coding and programming
    2. Improvement for F-Series coding and programming
    3. Improvement for CAS4 OBD key learning
    4. Bugfix

    BMW V1.4.3 2019-10-23   Require firmware V1.4.3           
    1. Improvement for E-Series coding and programming
    2. Improvement for F-Series coding and programming
    3. Add support for CAS4(1L15Y) OBD key learning
    4. Bugfix

    V1.4.2

    2019-09-20            Require firmware V1.4.2
    BMW V1.0.0
    1. E-Series programming, coding, DTCs
    1). Support autodetect car chassis
    2). Support scan all car units
    3). Support calculate all configuration units
    4). Support read/write car configuration(FA)
    5). Support input HW/ZB number to programming
    6). Support calculate default coding from FA
    7). Support edit detail coding information, change car config
    8). Support many languages DTC code
    2. F-Series programming, coding, DTCs
    1). Support autodetect car chassis
    2). Support read/write car configuration(FA)
    3). Support calculate programming files from unit, car, whold database
    4). Support calculate default coding from FA
    5). Support edit detail coding information, change car config
    6). Support detail special function list from coding
    7). Support many languages DTC code
    3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
    1). Support read key information, write key inforamtion
    2). Support key learning
    3). Support read/write EEPROM
    4). Support read ECU/gearbox synchronize codes
    5). Support write ECU/gearbox synchronize codes
    6). Support synchronize ECU and CAS
    7). Support synchronize CAS and ELV
    8). Support read ISN via OBDII
    9). Support reset KM via OBDII
    10). Support disable key/enable key
    4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
    1). Support read CAS encrypt key via OBDII
    2). Support key learning via programmer and via ignition switch
    3). Support disable key/enable key
    4). Support erase key position
    5). Support reset KM via OBDII
    6). Support read ISN via OBDII
    7). Support backup/restore coding
    8). Support update original CAS4 file
    5. FEM/BDC OBD key learning
    1). Support read FEM/BDC encrypt key via OBDII
    2). Support key learning via programmer and via ignition switch
    3). Support disable key/enable key
    4). Support erase key position
    5). Support reset KM via OBDII
    6). Support read ISN via OBDII
    7). Support backup/restore coding
    8). Support exchange used FEM/BDC
    9). Support close/open transport mode
    10). Support reset ECU lock
    11). Support switch on ignition without working key
    6. CAS EEPROM dump key learning
    1). Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
    2). Support prepare dealer key via programmer
    3). Support disable key/enable key
    4). Support read ISN from working key
    7. 8HP Gearbox renew
    1). Support clear ISN in 8HP gearbox
    2). Support backup/restore coding
    3). Support reset adaptation information
    8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc
    9. Read E-Series/F-Series ECU ISN via OBDII
    1). Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
    2). Support MED17xx/MVD17xx/MEVD17xx/MV1722
    3). Support MED172/MEV17N46/ME17N45
    4). Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU
    10. Support exchange ECU and CAS
    1). Support write ECU ISN via OBDII
    2). Support write ECU VIN via OBDII
    3). Support change ECU ISN and VIN with EEPROM dump
    4). Support chagne CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump
    11. CAS repair(OBD&EEPROM)
    1). Support repair ISTAP CAS
    2). Support repair CAS EEPROM(Service mode EEPROM), you can start engine after repair the file(CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)
    12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
    1). Support CAS3+(1L15Y) encrypt version
    2). Support CAS3++(ISTAP) version
    3). Support CAS4+(5M48H) version
    13. File KM calibration
    1). Support EWS1, EWS2, EWS3, EWS4
    2). Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
    3). Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
    4). Support E-Series dashboard EEPROM(M35080)
    5). Support F-Series dashboard EEPROM(35160, 35128)
    14. Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer
    15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG